FabulaTech Forum
        (http://www.serial-port-splitter.com/forum)
      

        Serial Port Solution >> Serial Port Splitter >> GPS
        
(Message started by: three83 on Jan 17th, 2007, 8:28am)
Title: GPS
Post by three83 on Jan 17th, 2007, 8:28am
I'm using serial port splitter to run 3 applications that access the same com port.  Connected to the com port is a gps.  Sometimes it works great other times not so great.  When it stops working I am unable to get NEMA data from the GPS.  If I stop the serial port splitter software I will start getting NMEA data, then if I restart the serial port splitter software no NMEA data.  Generally after serveral reboots it will start working again for a while then the same thing happens.
Title: Re: GPS
Post by Andrew on Jan 18th, 2007, 12:30am
Hi!
First of all, what version of Serial Port Splitter do you use? Please check if it the latest version.

Second question: is your GPS a serial device or USB device. I mean, is it connected to physical serial port, or does it create virtual COM port?

One more question: what access rights settings you've configured for split COM ports and what is priority signals COM port setting?

Awaiting your reply.
Title: Re: GPS
Post by three83 on Jan 18th, 2007, 7:29am
I'm running Version 3.6.4 of Serial Port Splitter

The GPS is a serial device but is connected to the PC with a USB to Serial Adapter.  It is using COM2 on the computer.

We are not splitting com ports we have com port 2 shared.

Thanks.
Title: Re: GPS
Post by Andrew on Jan 18th, 2007, 7:56am
1. Is it possible to send us screenshot of Serial Port Splitter GUI  as soon as error occurs?

2. Check and double-check you are using 3.6.4 version, because similar issue was fixed in 3.6.4

3. Try split feature instead of share. I mean split COM2 to several virtual COM ports (COM3, COM4, COM5) and use these ports instead of COM2

Awaiting your reply.
Title: Re: GPS
Post by three83 on Jan 18th, 2007, 9:29am
There is no error, the applications just stop receiving GPS data.

Verified I am running 3.6.4

I will attempt trying the split feature but I don't think this will work with our applications.
Title: Re: GPS
Post by three83 on Jan 18th, 2007, 1:03pm
I tried splitting the port instead of sharing and had the same problem.......no NMEA Data from the GPS.
Title: Re: GPS
Post by Andrew on Feb 9th, 2007, 12:43am
Hi, is GPS port virtual or physical COM port?
Could you please check that the port is present in Windows, the disable/enable Serial Port Splitter and try again.