Dec 3rd, 2008, 10:26pm
   FabulaTech Forum
   Serial Port Solution
   Network Serial Port Kit (Moderators: Keith, Andrew, Mike)
   Reconnection Issues		 « Previous topic | Next topic »
Pages: 1  Reply Reply Notify of replies Notify of replies Print Print
   Author  Topic: Reconnection Issues  (Read 980 times)
imagesystems
FabulaTech Forum Newbie
*





   
View Profile

Posts: 1
Reconnection Issues
« on: Jul 14th, 2008, 4:04pm »		 Quote Quote Modify Modify
I've got version 5.4.  When one end with the port shared goes down, the end that connects to the port sits on "Connecting" and does not reconnect.  This happens when the connection is broken for more than a minute (computer restart).
 
Is there a way for the reconnection to happen successfully if one end is down for an unknown amount of time?
 
- Thanks
IP Logged
Andrew
FabulaTech Forum Moderator
FabulaTech Forum Senior Member
*****






   
View Profile WWW

Gender: male
 Posts: 427
Re: Reconnection Issues
« Reply #1 on: Jul 24th, 2008, 1:26am »		 Quote Quote Modify Modify
The program allows to configure the following settings:
http://www.network-serial-port.com/network-serial-port-kit-help/setting- up-connection-settings.html
 
"Use Custom Connection Timeout"
 
Maximum connection timeout: specifies timeout (in seconds) used when connecting to remote Network Serial Port Kit. Within this period, local Network Serial Port Kit will try to establish connection with remote computer.
 
 
"Auto-Reconnect when Connection is Broken"
 
Reconnect interval: specifies period of time (in seconds) used when connection is lost or connection with remote computer cannot be established. Local Network Serial Port Kit will try to reconnect to remote computer periodically on the expiry of this time.
 
Thanks!
IP Logged
Andrew Scott

FabulaTech
===================
http://www.fabulatech.com
Pages: 1  Reply Reply Notify of replies Notify of replies Print Print

« Previous topic | Next topic »